10
Earthquake Sound Corp. | (510) 732-1000 | www.earthquakesound.com
11
Specifications are subject to change without notice.
Use 3 meter 1/4” TS to 1/4” TS speaker cable included in the IQ-52
package to connect the left and right speakers via the 1/4” TS jacks on
the back of each speaker.
iPod® Universal Dock Adapters: Plays & Charges for your iPod®*
Universal Dock Adaptor compatible for iPods®: 4pcs, the number (8-11)
I. 8#. iPod nano® 2GB 4GB
II. 9#. iPod® with video 30GB
III. 10#. iPod® with video 60GB 80GB
IV. 11#. New iPod nano® 2GB 4GB 8GB
Note:
*Charges most iPods®
Before connecting the IQ-52 Powered Speaker System, make sure the
power from the computer or other output device has been turned off and
the IQ-52 system is also turned off.
Plug the RCA cable to the corresponding output connectors of a
computer sound card, portable music player, etc. You can also use the
1/8” stereo mini cable to connect a secondary audio device to the AUX
input.
Speaker Wire Connections
Connecting to iPod®
Connecting to a Computer Sound Card or Other Audio Output Device
For optimal performance of the IQ-52, please read the following
directions carefully before installation.
Use of improper Voltage may result in hazardous conditions and/or
damage to speaker components not covered by speaker warranty.
Connections: Connect the RCA outputs of your IQ-52 to the
corresponding computer sound card, portable music player, or other
audio device. We recommend that you use the supplied cables (or
cables of equal or higher quality) for all connections. Be sure that the IQ-
52 is powered off before making any connections.
Correct Power Operation: Since the IQ-52 contains amplifiers, it must be
connected to a power outlet using the detachable AC cable that is
provided. Before connecting power, please make sure that the On/Off
switch to the off position.
Precautions
Installation
