x4
x4
Note
The speaker stand mounting bracket is designed
to slide into a channel found at the base of the
main speaker mounting bracket shown in the
images to the right.
1.
With the included mounting hardware, fasten the
35mm speaker stand bracket to the main speaker
mounting bracket with a 3/16 hex key allen
wrench (not included). Slide the brackets together
as shown in the images to the right and use four
of the nuts and bolts to secure them together.
ASSEMBLING DJ-ARRAY GEN2 SPEAKERS
Before you begin assembling the DJ-Array GEN2 speaker system, make sure
that you have all of the required mounting hardware. Each array requires 12
bolts and four nuts for assembly.
Earthquake Sound Corp. | (510) 732-1000 | www.earthquakesound.com
6
DJ-Array GEN2 Manual
