Earthlite Ellora Salon Top User Manual Download Page 18

Perform the following steps as needed for basic maintenance on your Ellora

 massage table 

and optional accessories. Perform the basic maintenance recommendations for upholstery 
between client treatments.

Upholstery

Steel
Table Frame

Electronic 
Components

Lubrication
& Mechanical

Remove day-to-day dirt with a mild soap and warm 
water solution. For tough stains and to disinfect, use 
a 15:1 water to bleach solution. Always rinse surface 
with clean water, and then gently wipe the upholstery. 
Allow upholstery to air dry before using or storing. 
Do NOT use Armor All® or citrus-based cleansers. For 
best results, use only the products suggested above. 
Alternative cleansing methods may cause serious 
damage to your table. Such damage would not be 
covered under the Earthlite warranty program.

The powder coated steel frame can be kept clean with 
a mild detergent and warm water mix. Periodically 
remove dust from frame with a dry, soft cloth. 

Anti-static electronic aerosol dusters can be used to 
keep the surfaces of electronic components, power 
cables, and plugs free of dust.

If necessary, lubricate wheel joints, casters, foot 
glide levelers, ball joints, and other mechanical 
parts with a light machine oil. Periodically check 
table and ensure all bolts remain tightened.

• Table Bed Surface
• Flex-Armrests
• Headrest Cushion
• Salon Pillow
• Bolsters

• Main Steel Frame
  and Legs

• Foot Controls
• Hand Controls
• Motors
• Power Cables
• Plugs

• Wheel Joints
• Casters
• Foot Glide Levelers
• Ball Joints, etc.

CARE & MAINTENANCE

Recommendation

Category

Application

16

TABLE MODEL COVERAGE

Ellora

 models covered by this user manual.

xx = color code for upholstery

28” table_Code: 80090xx
30” table_Code: 80091xx
32” table_Code: 80092xx

80029xx

28” table_Code: 80087xx
30” table_Code: 80088xx
32” table_Code: 80089xx

28” table_Code: 151xx
30” table_Code: 153xx
32” table_Code: 155xx

28” table_Code: 150xx
30” table_Code: 152xx
32” table_Code: 154xx

28” table_Code: 162xx
30” table_Code: 148xx
32” table_Code: 149xx

28” table_Code: 109xx
30” table_Code: 110xx
32” table_Code: 111xx

28” table_Code: 161xx
30” table_Code: 146xx
32” table_Code: 147xx

Pneumatic Top w/o Accessories

Manual Top

Top

Pneumatic Top w/ Accessories

Pneumatic Top

Electric w/o Accessories

Electric w/o Accessories

Salon Accessories

Salon Top

Tilt Top

Flat Top

Summary of Contents for Ellora Salon Top





















Reviews: