TABLE REMOVAL FROM SHIPPING CRATE
All Ellora table models come completely assembled and ready to use.
If you did not have your table shipped with ‘white glove’ service, you may be
required to remove your table from its shipping crate. We highly recommend
that at least two people conduct the following steps to uncrate the table.
Unpacking your Ellora
™
Stationary Table
Recommended Tools Needed
The following steps will guide you through carefully removing your stationary table from the shipping crate.
We recommend wearing work gloves during these steps.
Remove the rectangular cardboard lid from the top of the table. Once you have removed the cardboard lid
and surrounding cardboard walls from shipping crate, you will find the wheels and foot glide levelers are
seated tightly within wood brackets which have been screwed into the plywood base of the shipping crate.
Phillips #1 Screw Driver
Work Gloves
Step 1
With a Phillips #1 screwdriver (or a powered screwdriver),
carefully unscrew and remove the two (2) Front facing wood
brackets from the plywood base. (Diagram A)
We recommend removing only the two (2) front facing wood
brackets (Diagram A) that enclose the foot glide levelers. Do
not remove the rear brackets which enclose the rear wheels
(Diagram B). These brackets are twice as thick as the front
brackets, and will be more difficult to remove.
Step 2
Once the front brackets are removed, carefully pull the table
straight away from the rear brackets and slide the table onto
the floor. We recommend at least two (2) people conduct this
step together. (Diagram C)
Step 3
Once the table is pulled safely away from the shipping crate,
make sure the path from the table to your preferred destination
is clear of any obstacles or tripping hazards. (Diagram D)
C
D
A
B
It is possible to lift the table directly out
of the shipping crate without removing
any of the wood brackets, but this is not
recommended because the weight of the
table is at least 180 lbs.
8
