SECTION 4: CLEANING & MAINTENANCE
Push in locking tab
(on both sides of drawer)
Pull up on
drawer face
Removing the Drawer
1. Pull the drawer out to the fully open position.
2. Push in the locking tab on one side, and pull up on the drawer face.
3. Once the drawer is loose, repeat process on the opposite side.
4. Grip the drawer on both sides and pull it up and out from the glides.
5. For safety reasons, push both drawer glides back into the drawer until ready
to re-install the drawer.
Allow the warmer to cool for a minimum of 30 minutes before
attempting to remove it the drawer.
Before cleaning, always uplug the table/trolley (where the
warming drawer is embedded into) from the electrical outlet.
Re-Installing the Drawer
1. Pull the drawer glides out to the fully open position.
2. Gently lower the drawer between the extended glides, until it is resting on the glides.
3. Push the drawer towards the back of the glides, until it fully engages the stopping
tab (on both sides).
4. Push down the front end of the drawer, engaging the locking tabs.
5. Gently close and open the drawer to make sure it is properly installed.
Ensure the drawer fully en-
gages the stopping tab
(on both sides of drawer)
7
