Adam Hall 87402, Quick Start Manual

Page: 1 / 2

Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. A level surface is required, otherwise there is a high risk that it could fall over.
7. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
8. Do not modify this equipment.
9. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
10. Plastic bags must be kept out of reach of children.
11. If you have any questions refering to this instruction or any warnings, please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/shop/
downloads/documents/manufacturersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Ans-
pach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Full extension ball race drawer slide
Drawer on ball-bearing chassis rail
Incl. Cylinder lock and 2 keys
Removable by quick release of the chassis rails
ASSEMBLY
Always attach the drawer at the front using all four screws.
Please note that the maximum load-carrying capacity of the drawers only applies if the drawer is supported, in addition
to being mounting at the front. In the case of heavy loads, the drawers should never be installed in the rack on its own,
but always above other drawers or devices, which in turn need to be supported.
SPECIFICATIONS
87402 / 87403 / 87404 / 87406
Rack Drawer steel 2 U / 3 U / 4 U / 6 U
Model name 87402 87403 87404 87406
Product type rack drawer rack drawer rack drawer rack drawer
Material steel steel steel steel
Surface powder coated powder coated powder coated powder coated
Colour black black black black
Outside height 2 U 3 U 4 U 6 U
Outside width 434 mm 434 mm 434 mm 434 mm
Outside depth 392 mm 392 mm 392 mm 392 mm
Inside height 74 mm 120 mm 175 mm 255 mm
Inside width 401 mm 401 mm 401 mm 401 mm
Inside depth 373 mm 373 mm 373 mm 373 mm
Material
thickness 2 mm 2 mm 2 mm 2 mm
max. load 25 kg 25 kg 25 kg 25 kg
Weight 6.9 kg 8.1 kg 9.3 kg 14 kg