background image

3

              

  Intended Use Statement

Safety Instructions

3. 

 ISO’ven Wood Fired Ovens are intended for use in an outdoor 

situation where a traditional, masonry pizza/bread oven would be 
utilized. The use of a venting system is optional with the ISO’ven. 
The ISO’ven is designed to vent from the front of the oven however 
the installation of a front anchored vent is acceptable.

4.

 Before cleaning, allow the ISO’ven to cool. Use a dry brush and 

wet mop to clean; 

water only, no solvents

.

5.

 Use only solid, dry wood fuel in this unit. Do not use artificial 

wax based logs, chemical chimney cleaners or flame colorants in 

this Wood Fired Oven.

6.

 Never use gasoline, kerosene, gasoline-type lantern fuel, 

charcoal lighter fluid, or similar liquids to start or “freshen up” a 

fire in this Wood Fired Oven. Keep all flammable liquids at a safe 

distance from the ISO’ven.

7.

 Do not use an insert or any other product not specified for use 

with the ISO’ven Wood Fired Ovens unless written authorization 
is given by Earthcore. Failure to heed this warning may cause a 

fire hazard and will void the warranty.

8.

 When in doubt about a component’s usability - has visible or 

suspected physical damage - consult your Isokern distributor or 
authorized Isokern representative for advice.

9. 

Modification to the ISO’ven Wood Fired Oven components not 

mentioned in this manual may void claims, and could result in an 
unsafe and potentially dangerous installation.
 

Alterations to the ISO’ven Wood Fired Oven are allowed 

only with prior written approval and instructions from Earthcore 

Industries, LLC. The installer indemnifies the manufacturer of all 

claims and under no circumstances will manufacturer be liable  
for consequential, incidental, indirect, punitive or other damages 
of any kind or nature, whether foreseeable or not, based on any 

claim by any party as to the modifications of the ISO’ven Wood 

Fired Oven.

10.

  Never leave children unattended when there is a fire burning 

in the ISO’ven Wood Fired Oven.

Intended Product Use Statement:

 

The ISO’ven Wood Fired Oven is intended to 

burn solid wood fuel. A gas starter option is available.

Note:

  This Wood Fired Oven is not designed to sit 

directly on a combustible floor system.  

 

This Wood Fired Oven is intended for use as 

an outdoor oven appliance only and is not intended for 
indoor use.

 

Overfiring, abusive burning or mistreatment will 

void any claims (eg. burning construction debris or other 

highly flammable material; tossing, kicking or otherwise 

forcing logs into the oven).
 

ISO’ven Wood Fired Ovens are unique 

outdoor Wood Fired Ovens. ISO’ven Wood Fired Oven 
units are intended for installation outside residential 
homes and other buildings of conventional construction.

Note:  

Important areas of concern with the installation of 

these Wood Fired Ovens are: construction of proper load 
bearing foundation and concrete support slab; proper 
assembly of components and techniques employed in 

applying  finishing  materials  to  the  Wood  Fired  Oven 

opening.
 

Each of these important topics will be covered 

in detail throughout this manual. Installation personnel 
must give special attention to each topic as the installation 
progresses.
 

 

Earthcore is not responsible for other 

construction work around the Wood Fired Oven unit.

Note

: Do not scale drawings. Illustrations in this manual 

are  not  to  scale  and  are  intended  to  show  “typical” 

installations.

1. 

Before starting the ISO’ven Wood Fired Oven 

installation, read these installation instructions carefully 
to be sure you understand them completely. Failure to 
follow them could cause oven malfunction resulting in 
serious injury or property damage.
 

2.

 Always check local building codes governing outdoor 

appliance installations. 
 

 

Summary of Contents for ISO'ven

















Reviews: