NOOMi Installation Guide
© Copyright EarlySense Ltd., 2020. All rights reserved
Doc #: TS-101 Page 5 of 10 Rev: 01
5.
NOOMi Configuration and Installation
The NOOMi d
efault network configuration is DHCP and SSID ‘Early
S
ense’
. The Password
will be shared by EarlySense. Once the WIFI network is configured then NOOMi will work
automatically and connect to its server.
In cases where the network configuration is different than the required defaults, please
use the EarlySense TechTool to reconfigure NOOMi
’s network interface.
5.1
NOOMi Network Configuration
When adding devices to the TechTool, ensure that NOOMi device is turned ON.
Note!
The NOOMi unit is ON if it is connected to electrical power and the green power
indicator light is illuminated.
Figure 1: Power-On Indication
Monitoring devices can be added using the following methods:
•
Automatic scan
•
Manually
•
Importing a List of Devices
5.1.1 Automatic Scan for Connected Devices
Scanning the network for monitoring devices can be performed automatically. By clicking
the Start button in the Devices section monitoring devices will be detected automatically
and added to the TechTool
’s
device list. (Requires port 3034-3075 to be open in the
Windows firewall.)
