25
2.2
Positioning the Chair Sensing Unit on a chair
Place the Chair Sensing Unit on a chair so that the top surface is facing upwards. Secure the
cushion to the chair’s back, using the strap. Position the
cable so that it will not interfere with
patient or staff movement in the room.
Figure 6: Example of Chair Sensing Unit attached to a chair
WARNING
Do not place the InSight Device attached to Cradle
above the patient’s
head. Do not obstruct access to the InSight Device. There should be a
possibility to easily
access the InSight’s front panel as well as access to
disconnect InSight Device from the Cradle in case of necessity or malfunction.
CAUTION
The patient should not be in direct contact with the Sensing Unit. A mattress
cover should always be placed as a barrier between the Sensing Device of
the EarlySense InSight System and the patient.
CAUTION
Handle the InSight System with care.
Do not drop, bang or shake the InSight System. Rough handling can break the
internal circuit boards.
NOTE
Please ensure Sensor's correct positioning under the mattress. Misplacement of the
Sensor might result in wrong readings and notifications.
Summary of Contents for InSight AME-01350-US
