17
1.2.1
Sensing Units
Bed Sensing Unit
The Bed Sensing Unit is placed under the mattress (See Positioning the InSight Device and Sensing
page 24) and detects physiological and motion signals generated by the patient. A solid base
plate is designed to be fixed to the bed’s frame for convenience during placement.
Chair Sensing Unit (Optional)
The Sensor is inserted into a cushion so that it is not in contact with the patient. The cushion can
be placed on a chair and is able to detect the patient’s Heart Rate, Respiratory Rate, and
Motion while seated.
Only one Sensigs device can be connected to the EarlySense InSight Device, either
the Bed Sensing Unit or the Chair Sensing Unit
If using an accessory switch (provided by Earlysense), Both Sensing units can be connected to
the InSight Device together.
Figure 2:
Chair Sensing Unit- a cushion with a sensor incorporated inside
1.2.2
Sensing Unit Extension Cable
An optional extension cable for the Sensing Unit is available, if required.
NOTE
Use total length of extension cable which should not exceed 12 meters (39.36 ft.).
Sensor Cable
Chair Sensor
EarlySense Cushion
(Sensor included
inside)
Summary of Contents for InSight AME-01350-US
