18
PARTS KIT
A
1 X RIGHT ANGLED 22.2MM BRACKET
B
1 X STRAIGHT BRACKET
C
HEADSET BOLT INSERT
D
1 X RED REAR REFLECTOR
E
1 X WHITE FRONT REFLECTOR
F
2 X WHEEL REFLECTORS
TOOLS REQUIRED
Crosshead screw driver
1
2
PEDAL ASSEMBLY
Make sure you take note of which pedal is the right hand
pedal, and which is the left hand pedal. Apply some grease
to the threads. If there are washers supplied in the parts
kit, make sure to use them.
Using the 6mm allen key provided, tighten the pedal to
35Nm. The drive-side pedal is tightened clockwise, the non
drive-side pedal is tightened anti-clockwise.
