7
CAUSE
ACTION REQUIRED
Paint too diluted
Add undiluted paint
Paint output too high
Reduce the paint output by turning Fluid
.
Adjusting Screw (10) clockwise
Moving too slowly
Increase speed of application
Spray trigger held long
Release Trigger (7) sooner
Spray Gun too close
Increase the distance between the Spray
Gun and the work-piece
Paint too diluted
Add undiluted paint
Paint output too low
Increase the paint output by turning
Fluid Adjusting Screw (10) anti-clockwise
Moving too fast
Reduce speed of application
Gun clogged
Clean the Spray Gun
Gun too far away
Move the Spray Gun closer to the work-
.
piece
Paint too thick
Add thinners
Fluid Tip clogged
Clean the Fluid Tip (4)
Pick-Up Tube clogged
Clean Pick-Up Tube (14)
Air Hose split
Replace Air Hose (16)
Grainy paint
Filter the paint
Container almost empty
Refill Paint Container (15)
Spray Gun at an angle
Check that the Pick-Up Tube (14) is
pointing towards the paint
Air inlet blocked
Check the condition of the Filter (18) and
clean if necessary
PROBLEM
The paint drips onto
item being painted
Paint is too thin or
irregular
No paint being
released
TROUBLESHOOTING