Lock Mode:
Make sure Lock mode is MOD
AGC_Threshold:
Keep default setting. It will effect antenna sensitivity of tracking.
Range is 0-255, the bigger figure will make antenna move faster,
and decrease sensitivity of weak signal.
Tx parameters：
All Tx parameters are from MODEM.It will not effect antenna tracking.
But you can check and confirm Tx link is well configured or not.
Tx Enable function:
It is swtich to enable or disable Tx link by ACU.
We can use this function
to verify BUC working or not.
Rx parameters:
All Rx parameters are from MODEM.
Antenna will use this
parameters for tracking.
Make sure RX_IF LO, POL must be 100% matched with opt. file
setting, Rx_BW/Rx_SR must be similar figure (±20%difference）
as real symbolRate, this figure will effect Signal Quality figure.
Another way for checking
Check ACU side, press Right button， check RX VIEW and TX VIEW page.
Appendix 2
Sub-page Rx Tx page
41
www.eardatek.com