CREATED ON: April 28, 2016
Wiring
System Type : Star/Wye
Keys and Operation
RUN Mode
•
Once there is power failure, energy, Load/hour, Display Status will be
saved.
•
RS485 communication status can be viewed in Page 1 “DEV ID”
parameter.”T” for transmit, ”R” for receive & “U” for device ID
mismatch.
PROGRAM Mode
SELECT Key
RUN Mode
: used to select the required page.
PROGRAM MODE
: used to enter into program mode.
: used to select digits.
ADVANCE Key
RUN Mode
: used to view the pages.
PROGRAM Mode
: used to increase the value by one
PREVIOUS Key
RUN MODE
: used to view previous pages and parameters
PROGRAM MODE
: used to program previous parameters.
NEXT Key
RUN MODE
: used to view next pages and parameters
PROGRAM MODE
: used to program next parameters.
SCROLL/HOLD Key
RUN MODE
:used to scroll/hold the parameters
Program
page
Function
Range
Factory
setting
1
PASSWd
0001 to 9999
1000
2
CT-PRI
1A to 5000A
5
3
CT-SEC
1A to 5A
5
4
PT-PRI
110V to 999KV
415
5
PT-SEC
110V to 500V
415
6
CLR-EN
Y/N
N
7
dEV-Id
1 to 247
001
8
bAUd
2400,4800,9600
and 19200(bps)
9600
9
POLES
1 to 28
04
10
PLSOUT
Active energy/
Reactive energy
A
11
ChPASS
0001-9999
0001
Technical Specification
Disposition
Once the product life is over, you may send back the unit to EAPL for
disposition
Contact
Electronic Automation Pvt. Ltd
#20, KHB Industrial Area
Yelahanka, Bangalore -560064
Ph: +91-80-28567561/2, /42802345
Email:
,
www.eaplindia.com
Product Function
Multi Function Meter
Rated voltage(Aux.Supply)
24V DC ±10%
Power consumption
< 1W
Input voltage
3 Phase 4 wire (R,Y,B,N )
Range - 415 VAC (-40% to +20%)
110 VAC (-40% to +20%)
Input current
Current inputs (AR, AY, AB)
1A to 5A (to 200%)
Input Frequency
50 Hz,
±
2%
Burden
< 0.2 VA per Volts/Amps input
Accuracy
Class 0.5
Recovery Time
2 sec minimum.
Communication
RS-485 MODBUS RTU Protocol
Meter Constant
3200 Pulses / KWh
3200 pulses / KVArh
Ambient Temperature
Operation : -10°C to + 55°C(14°F to131°F)
Storage : -25°C to + 80°C(-13°F to 176°F)
Humidity
Up to 95% RH @ 40°C
OD RE KN 540011 REV 02/28-04-16
Page 2 of 2
1, 2, 3, 4
: R, Y, B, N
5 ,6
: No connection
7,8
: A,B (RS 485Communication port)
9, 10
: S1, S2 (R Phase)
11,12
: S1, S2 (Y Phase)
13,14
: S1, S2 (B Phase)
15,16
: Auxilary Supply(24V DC±10%)