EAntenna 17740.6-5, Manual

Page: 10 / 17

Adjusting SWR:
Once positioned the antenna with your measurements, you may need some fine-tuning to get the SWR desired . Shifting
the curve piece inward or outward several millimeters, is the way to go. Looking to the center frequency is 50,150 MHz
in the lower SWR. The best option is to adjust with analyzer or with the help of a swr meter and antenna 1 or 2 meters above
the ground while it is sufficient to have achieved in the setting, give us the same results being any other height on the tower or
mast.
ENGLISH
Coax cable feeding:
After several trials, we see that the balun aluminum makes it worse job than a coaxial choke. For this, we recommend 5 turns
of 8 cm and thus the RF return will be minimal or absent.
In the drawing advise you to do the clash below the coaxial elements do not causes interaction with the elements.
BOOM
COAXIAL
Vivo
Inner Conductor
Malla
Outter Conductor
COAXIAL
Boom
REF DE1 DE2