Eanmay ST-VGT Instruction Manual Download Page 43

Page: 43 / 74

6.7.3 set related zone ( Support 8 Group Of Related Zone)

Formula: Zone1 + Zone 2 + related time + Mode

1. Dual trigger alarm mode

*Single trigger zone 1 or zone 2, do not

alarm.

* trigger zone 1 or zone 2 separately

within the related time, zone 1 and zone

2 alarm.

2. disable

Do not use the related zone

Example: make zone 5 and zone 9 related as group of 4, and related time is 120

seconds. Mode is dual trigger alarm mode.

Please enter the related

zone group No., press

confirm key to save,press

back key to exit.

Please enter the No.1 related

zone,press confirm key to save,

press back key to exit.

Please enter the No.2 related

zone,press confirm key to save,

press back key to exit.

Setting is saved,Please enter 0 to 255 second

relation time,press confirm key to save, press

back key to exit.

Setting is saved,Please choose relation

mode:1. Double trigger alarm mode 2.

disable,press confirm key to save, press back

key to exit.

Enter password

0 1 2 3 4 5

7 #

3 #

Summary of Contents for ST-VGT











































































Search results

Summary of Contents for ST-VGT

Reviews:

Related manuals for ST-VGT

Brands by name

Popular brands

Eanmay ST-VGT, Instruction Manual

Search results

Summary of Contents for ST-VGT

Reviews:

Related manuals for ST-VGT

Brands by name

Popular brands