background image

1. Please read and follow these instructions carefully
2 Power supply should be in accordance with local standard of
ground-fault protection (GFCI) Please test Ground-fault before using product.
3. Ground wire of product should be connected to permanently fixed ground

4. Do not use Extension Cords to connect to power supply, and Place Junction
box 60” from the floor.

5. all electrical connections of unit installations should be made by a qualified Electrician
6. Do not use if under the influence of Drugs or Alcohol.
7. Children should only use if under Adult supervision
8. Warning: The Water Temperature should never Exceed 60 C when using this product
9. Do not USE strong caustic or abrasive chemical cleaners to clean product, Ingredients
such as sulphuric acid, lye, etc.
10. The steam generators provided are 3kw or 6kw. Please ensure to use the proper wire size
and breaker. All showers use 220V two wire only with NO Neutral wire
11. Warning, Do not Unscrew steam cleaning port when steamer is on to avoid being hurt by
the steam.

°

Radio Volume

Configuration

Parameter

Rated Voltage

Rated Voltage

Rated Power

Rated Power

Rated Power

Exhaust
Fan

Drain Valve

Exhaust Fan

Summary of Contents for DZ972-1F8























Reviews: