User’s guide
Matrix Flower
User’s guide
Matrix Flower
2
3
1. SAFETY INSTRUCTIONS
Please read the instructions care-
fully as they include important
information about the installation,
operation and maintenance.
ì
Please keep this User Manual for
future reference. If you sell the fixture
to another user, be sure that they also
receive this instruction booklet.
ì
Unpack and check carefully that there is
no transportation damage before using
the fixture.
ì
It is important to ground the yellow/
green conductor to earth in order to
avoid electric shock.
ì
Disconnect mains power before servi-
cing and maintenance.
ì
Maximum ambient temperature is:
40°C. Do not use the unit in places
where the temperature is higher than
this.
ì
In the event of a serious operating
problem, stop using the fixture imme-
diately. Never try to repair the fixture
by yourself. Repairs carried out by
unskilled people can lead to damage or
malfunction. Please contact the nearest
authorized technical assistance center.
Always use spare parts of the same
type.
ì
Do not connect the device to any dimmer
pack.
ì
Do not touch any wire during operation
as there might be a hazard of electric
shock.
ì
To prevent or reduce the risk of elec-
trical shock or fire, do not expose the
fixture to rain or moisture.
ì
The housing must be replaced if it is
visibly damaged.
ì
Do not look directly into the LED light
beam while the fixture is on.
ì
There are no user serviceable parts
inside the fixture. Do not open the
housing or attempt any repairs by
yourself. In the unlikely event your
fixture may require service, please
contact your nearest dealer.
ì
Due to the magnifying type lens, please
keep it out of direct sunlight. This can
cause heat to build up inside the unit,
which will seriously damage it.
2. TECHNICAL SPECIFICATIONS
ì
DMX channels: 2 channels
ì
DMX, master/slave and sound-activa-
ted modes
ì
256 high-powered 5mm LEDs
(R: 64, G:64, B: 64, W:64)
ì
Produces unique and exciting LED
criss-cross patterns that can be
projected on a wall, ceiling or dance
floor
ì
4-digit LED display
ì
Wide beam spread covers wide areas
ì
Digital Display for Address and
Function Settings
ì
Power supply
Input voltage: AC 100V-240V 50/60Hz
Power consumption: 25W
ì
Dimensions: 325×310×230mm
ì
Weight: 3.3kg
3. INSTALLATION
The unit should be mounted via its screw
holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration
and slipping while operating. Always
ensure that the structure to which you
are attaching the unit is secure and is able
to support a load of 10 times the unit’s
weight. Also always use a safety cable
that can hold 12 times the unit’s weight
when installing the fixture.
The equipment must be attached by
professionals, and in a place which is out
of people’s reach and where no one has to
pass by or under it.
TABLE OF CONTENTS
1. Safety instructions
2. Technical specifications
3. Installation
4. How to set up the unit
5. How to control the unit
6. DMX 512 configuration
7. DMX 512 connections
8. Troubleshooting
9. Fixture cleaning
