Eaglemaster LT-6200 Owner'S Manual Download Page 2

Hi-tech hopping
code system

Press   Button once                                 

Arm / Door Lock  

Hold    Button for 2 seconds                   

Arm Without Siren/HornChirp

Press   Button once after 10sec.armed 

   Car finder 

Press   Button once after set Arming      

1st stage- Sensors by Pass 

 

Press   Button twice after set Arming     

 Sensors by Pass  

Press   Button                                          

Disarm / Doors unlock 

Hold    Button for 2 seconds.                  

Disarm Without Siren/HornChirp 

Press        Both buttons once                   

Panic / Anti Car-Jack

 

(ACC ON)

 

Hold         Both buttons for 2 seconds    

Trunk Opener  

2nd stage-

REMOTE  FUNCTION TABLE

Remote Features: 

Each alarm is assorted with two special transmitters. 
Hi-tech hopping code system is applied to each 
transmitter. This system has supper confidential 
technology. It can hardly possible be copied. It is used 
high stable UHF frequency as radio transmission circuit. 
For your operation convenience, four transmitters can 
be learn into this alarm at the same time.
Transmitter's battery use: 12V GP23A

Sub-Function Setting 

In 

Disarm

 position. Turn off 

IGN ,

within 10 seconds 

 press valet SW 5 times,

 until siren /horn 

chirp 4 times and lights ON means system entering in programmable mode. The times of valet SW 
pressing is according to the function item number. To judge it as per LED indication (times of 
flashes).E.g. to set sub-function item No.2 :Press valet SW 2 times,LED quick flash 2 times after 
a pause. Then press remote to select ON or OFF .To press     button function will be ON , siren/horn 
will giving two chirps. To press      button function will be OFF ,siren/horn will giving four chirps.

Note: * means factory setting before delivery.

If the above condition happens , alarm will exit this setting mode by turn IGN to ON position or 
within 10 seconds there is no setting activity , Lights will OFF.

S U B - F U N C T I O N    TA B L E

Item No.                    Function                                                  ON         OFF

    1          Immobilizer (smart engine disable)                            YES       *NO

    2          Passive arming function setting (door lock)               YES       *NO

    3          Passive arming function setting (door without lock)  YES       *NO

    4          Door switch arming detection delay                          *0sec.    45sec.

    5          Safety Door Lock                                                       *YES        NO

    6          Unlock output 1or 2 pulse selection                          *1pulse   2pulse

    7          Siren / Horn Selection                                           

     

*Siren     Horn

    8          Anti car-jacking mode selection                                *Active  Passive

WARNING! 

CHANGE BATTERY WHEN REMOTE 
RANGE IS GETTING SHORT                

Left button

Arm

Right button

Disarm

Summary of Contents for LT-6200







Reviews: