Page 4
OPERATION
When first switched on the P647UA will be in DAB mode, Press the MODE
switch if FM is required.
DAB OPERATION
When switched on for the first time in a new location, press the AUTO˜SCAN
button. This will search for all the available stations: if no signal can be found
"No Signal" will be shown in the display.
Press the UP and DOWN buttons to select the station required. This can also
be done by rotation the TUNE knob.
To store the station, press and hold one of the M buttons, until the displ;ay
shows “PRESET * STORED”. To store presets M6 to M10, press the SHIFT
button before pressing the M button.
Further information on the station can be obtained by pressing the
MENU/INFO button.
If the tuner is currently in the FM mode, then DAB radio can be selected by
pressing the MODE button.
FM OPERATION
Either: Rotate the TUNE knob to select the frequency required,
OR: Press the UP and DOWN buttons to change the frequency in 50 kHz
steps.
OR: Press the AUTO-SCAN button to scan for the next strong signal.
To store the station, press and hold one of the M buttons, until the displ;ay
shows “PRESET * STORED”. To store presets M6 to M10, press the SHIFT
button before pressing the M button.
Further information on the station can be obtained by pressing the
MENU/INFO button.
If the tuner is currently in the DAB mode, then FM radio can be selected by
pressing the MODE button.
REMOTE CONTROL
The remote control handset has all the same controls as the front panel with
the exception of the rotary tuning control.
Summary of Contents for P647UB
Page 1: ...Page 1 P647UB FM DAB TUNER...
