Page 2
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the
product for future reference.
BEFORE USE
You must inspect the product including its cable and plug for any signs of
damage. If the product is damaged, DO NOT use it, and contact your supplier
immediately.
INSTALLATION
If permanently installed, the luminaire must be installed by a competent
elecrician in accordance with the latest IEE Wiring Regulations.
The P647UA is designed to be mounted in a 19" rack, but may be used free-
standing if required.
Either plug the lead into a 13 A socket, or remove the 13 A plug fitted, and
wire directly to a fused spur or, if mounted in a rack, connect to a power
distrubution unit with the rack.
The wires are colour-coded as follows:
Brown = Live (phase)
Blue = Neutral
Green/Yellow = Earth
The P647UA must be earthed for safe and reliable operation.
In strong signal areas, attach the teolescopic antenna to the F-socket on the
rear panel, and extend the antenna. In lower signal areas, or if it is not
convenient to use the telescopic antenna, connect either an FM or a DAB
antenna to the F socket on the rear panel. Note that if the wrong type of
antenna is used, then reception will be poor.
Connect a lead from the RCA phono sockets on the rear panel to the input of a
power amplifier or mixer. Connect the the line level input of the mixer or
amplifier. Do not use the microphone input, or the turntable input (often
labelled “Phono”)
Summary of Contents for P647UB
Page 1: ...Page 1 P647UB FM DAB TUNER...
