7001-MI-001
Revision --
Page 6 of 11
6.
System Wiring
6.1
Unless otherwise specified, follow the aircraft manufacturer’s electrical wiring practices and
maintenance manuals for installation of all system wiring.
6.2
Refer to Figure 2 for cable harness fabrication instructions to connect to the Audio Mixer.
6.3
Ground Audio Shields at ONE end only.
6.4
Unless otherwise noted, all shielded wire is M27500-(ga)TG(n)T14 and all unshielded wire is
M22759/16-(ga)-9, where (ga) is the wire gauge and (n) is the number of wires inside the shield.
6.5
Unless otherwise noted, all wire is 22 GA.
6.6
Route all system cabling through existing cable runs.
6.7
Secure all cabling using nylon cable ties and/or cable clamps using standard practices.
6.8
Cable lengths are dependent on Audio Mixer installation location.
6.9
Notes for Figure 2:
