11
PRECAUTIONS FOR THE REDUCTION OF ENVIRONMENTAL IMPACT
Alliage S/A aims to reach an environmental politics to promote the supply of
medical and dental products environmental conscious that continuously minimize the
environmental impact and that are more friendly to the environment and to the human
health.
To keep a minimum impact on the environment, observe the following
recommendations:
After installation, forward the recyclable materials for the recycling process.
During the life cycle of the equipment, turn it off when it is not being used.
To prevent environmental contamination, the disposal of the protective
plastic covers and other consumables must be according to the normal
procedure of the dental office for biomedical waste.
The biomedical waste comprises nonhigh materials susceptible to cause
diseases or suspect for housing pathogenic organisms that must be stored
in a yellow bag properly labeled with the symbol of biological hazard,
stored in a container resistant to perforation, tight and even recollection
and incineration.
The packaging
1
of the New IDA sensor is composed of cardboard and
plastic, which are 100% recyclable materials.
1
DIMENSIONS: 185 x 160 x 71.5 mm /WEIGHT: Approximately: 100g
PRECAUTIONS IN CASE OF DESTRUCTION OF THE EQUIPMENT
To avoid environmental contamination or inappropriate use of the New IDA when
it is destroyed, they must be disposed of (according to the current legislation) in an
appropriate place, since the existent materials inside it can contaminate the
environment.
To the European Economic Area (EEA), this product is subject to the Directive
2012/19/EU, ass well as to the correspondent national laws. This directive requires that
the product must be taken to a special waste collection site at the end of its lifespan.
Applies to the device and to the accessories
Contact the retailer if the final disposition of the product is necessary.
This equipment must not be disposed of as domestic waste.
