background image

73

EAGLE ELECTRONICS

FULL ONE-YEAR WARRANTY

“We”, “our”, or “us” refers to EAGLE ELECTRONICS, a division of LEI, the manufacturer of
this product. “You” or “your” refers to the first person who purchases this product as a
consumer item for personal, family, or household use.

We warrant this product against defects or malfunctions in materials and workmanship,
and against failure to conform to this product’s written specifications, all for one year (1)
from the date of original purchase by you. WE MAKE NO OTHER EXPRESS WARRANTY
OR REPRESENTATION OF ANY KIND WHATSOEVER CONCERNING THIS PRODUCT.
Your remedies under this warranty will be available so long as you can show in a reason-
able manner that any defect or malfunction in materials or workmanship, or any non-
conformity with the product’s written specifications, occurred within one year from the date
of your original purchase, which must be substantiated by a dated sales receipt or sales
slip. Any such defect, malfunction, or non-conformity which occurs within one year from
your original purchase date will either be repaired without charge or be replaced with a
new product identical or reasonably equivalent to this product, at our option, within a rea-
sonable time after our receipt of the product. If such defect, malfunction, or non-conformity
remains after a reasonable number of attempts to repair by us, you may elect to obtain
without charge a replacement of the product or a refund for the product. THIS REPAIR,
REPLACEMENT, OR REFUND (AS JUST DESCRIBED) IS THE EXCLUSIVE REMEDY
AVAILABLE TO YOU AGAINST US FOR ANY DEFECT, MALFUNCTION, OR NON-CON-
FORMITY CONCERNING THE PRODUCT OR FOR ANY LOSS OR DAMAGE RESULT-
ING FROM ANY OTHER CAUSE WHATSOEVER.  WE WILL NOT UNDER ANY CIRCUM-
STANCES BE LIABLE TO ANYONE FOR ANY SPECIAL, CONSEQUENTIAL, INCIDEN-
TAL, OR OTHER INDIRECT DAMAGE OF ANY KIND.

Some states do not allow the exclusion or limitation of incidental or consequential dam-
ages, so the above limitations or exclusions may not apply to you.

This warranty does NOT apply in the following circumstances: (1) when the product has
been serviced or repaired by anyone other than us, (2) when the product has been con-
nected, installed, combined, altered, adjusted, or handled in a manner other than accord-
ing to the instructions furnished with the product, (3) when any serial number has been
effaced, altered, or removed, or (4) when any defect, problem, loss, or damage has re-
sulted from any accident, misuse, negligence, or carelessness, or from any failure to pro-
vide reasonable and necessary maintenance in accordance with the instructions of the
owner’s manual for the product.

We reserve the right to make changes or improvements in our products from time to time
without incurring the obligation to install such improvements or changes on equipment or
items previously manufactured.

This warranty gives you specific legal rights and you may also have other rights which may
vary from state to state.

REMINDER: You must retain the sales slip or sales receipt proving the date of your
original purchase in case warranty service is ever required.

EAGLE ELECTRONICS

PO BOX 669

CATOOSA, OK 74015

800-324-1354

Summary of Contents for IntelliMap Journey



























































































Reviews: