background image

iii

To turn off HyperScroll..................................................................74

Pop-up Help........................................................................................74
Reset Options .....................................................................................75
Reset Water Distance ........................................................................76
Set Keel Offset ...................................................................................76
Sensitivity & Auto Sensitivity...........................................................78

Automatic Sensitivity ....................................................................78
To turn Auto Sensitivity back on ..................................................79

Set Language .....................................................................................80
Software Version Information...........................................................80
Sonar Chart Mode..............................................................................80

To change the chart mode color scheme .......................................81

Sonar Page & Sonar Chart Display Options ....................................81

Full Sonar Chart ............................................................................81
Split Zoom Sonar Chart .................................................................82
Digital Data/Chart .........................................................................83

Sonar Simulator.................................................................................85
Stop Chart ..........................................................................................86
Surface Clarity ...................................................................................87

To adjust the Surface Clarity level ...............................................87

Transparency .....................................................................................88

To adjust Menu Transparency level..............................................89

Units of Measure................................................................................89
Zoom & Zoom Bar ..............................................................................90
Zoom Pan............................................................................................91

Section 5: Troubleshooting ..........................................................92

Unit won't turn on..........................................................................93
Unit operates only in demo mode..................................................93
Unit freezes, locks up, or operates erratically ..............................93
Weak bottom echo, digital readings erratic, or no fish signals....94
 No fish arches when the Fish I.D. feature is off: .........................95
Noise ...............................................................................................95

Section 6: Supplemental Material ..............................................97

Summary of Contents for FISHMARK 640C













































































































Reviews:

Related manuals for FISHMARK 640C