Wear hearing protection.
Wear eye protection.
Wear respiratory protection.
Read the instruction manual
TABLE OF CONTENTS
Limited Warranty ............................................................................................... 2
Description......................................................................................................... 2
Inspection ..........................................................................................................
Safety Instructions .............................................................................................
Maintenance ...................................................................................................... 4
Operation ........................................................................................................... 4
Troubleshooting ................................................................................................. 5
Parts Breakdown ............................................................................................... 6
Tool Specifications
............................................................................................. 7
INSPECTION
Upon receipt of your new tool, carefully check for any shipping damage. If your new tool is
damaged in shipping you need to file a claim with the carrier at once, and before contacting
Eagle’s customer service department.
Also carefully check to make sure all accessories (if included) are with the tool. Make sure
any loose bolts, fittings etc. are tightened before you put this tool into service.
SAFETY INSTRUCTIONS
You should operate this air tool only if you have read this entire manual, and understand
its content, and you are familiar with safety and proper use when operating this equipment.
This air tool is part of a high pressure compressed air system, the following safety precau-
tions must be followed at all times.
1)
All persons in the work area must always wear approved eye and ear protection and
approved breathing apparatus when this spray gun is in operation.
2)
Never aim spray gun at anyone. Do not spray near sparks, open flame, lit cigarettes,
pilot lights, space heaters or any other potential ignition source. DO NOT SMOKE IN
WORK AREA.
)
Follow manufacturers instructions and safety information to ensure safe handling and
proper use of paints, lacquers, thinners, base coats, etc. Do not use latex or other
heavy paints. They are not recommended for this spray gun.
4)
WARNING! Solvents trichloroethane and methylene chloride (dichlormethane
- sometimes called methylchloride) can chemically react with aluminum used in most
spray equipment creating an explosion hazard. Read the label or data sheet from the
materials you intend to spray. NEVER USE ANY MATERIALS CONTAINING THESE
SOLVENTS. If unsure as to the composition oy your material, check with your supplier.
Do not use acids for cleaning.
5)
Always keep work area free from obstructions and well ventilated.
6)
Always disconnect spray gun from air source before disassembly.
