manualshive.com logo in svg

Eagle CUDA 240 S, Installation And Operation Instructions Manual

The Eagle CUDA 240 S is an exceptional fish finder equipped with advanced features to enhance your fishing experience. To ensure seamless setup and usage, this product comes with an extensive "Installation And Operation Instructions Manual" which you can easily download for free from our website.

Share
Download
background image

iv

Overlay Data ............................................................................. 113

To Select Data for Display: ............................................... 114
To Turn Off Displayed Data: ............................................ 114
To Change Displayed Data Font Size: ............................. 115

Pop-Up Help .............................................................................. 116
Position Pinning........................................................................ 116
Reset Options ............................................................................ 117
Screen Contrast and Brightness .............................................. 117
Set Language ............................................................................ 118
Set Local Time .......................................................................... 118
Show WAAS Alarm................................................................... 119
Software Version Information.................................................. 119
Sounds and Alarm Sound Styles.............................................. 120
Track Smoothing....................................................................... 121
Trail Options ............................................................................. 121

Delete All Trails .................................................................... 122
Update Trail Option.............................................................. 122
Delete Trail ........................................................................... 123
New Trail............................................................................... 123
Trail Visible/Invisible and Other Trail Options .................. 124

Units of Measure....................................................................... 124

Sec. 8: Supplemental Material ............................................ 125
FCC Compliance .................................................................... 125
Index......................................................................................... 127

WARNING!

A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD
TO OBTAIN POSITION INFORMATION.

CAUTION

When showing navigation data to a position (waypoint), a GPS unit will show
the shortest, most direct path to the waypoint. It provides navigation data to the
waypoint regardless of obstructions. Therefore, the prudent navigator will not
only take advantage of all available navigation tools when traveling to a way-
point, but will also visually check to make sure a clear, safe path to the waypoint
is always available.

WARNING!

When a GPS unit is used in a vehicle, the vehicle operator is solely re-
sponsible for operating the vehicle in a safe manner. Vehicle operators
must maintain full surveillance of all pertinent driving, boating or fly-
ing conditions at all times. An accident or collision resulting in damage
to property, personal injury or death could occur if the operator of a
GPS-equipped vehicle fails to pay full attention to travel conditions and
vehicle operation while the vehicle is in motion.

Summary of Contents for CUDA 240 S













































































































































Reviews:

No comments

Related manuals for CUDA 240 S

VEXILAR FL-18 Owner'S Manual preview
FL-18
Brand: VEXILAR Pages: 86
Raymarine hsb2 PLUS Owner'S Handbook Manual preview
hsb2 PLUS
Brand: Raymarine Pages: 228

Brands by name

Popular brands

Load more brands