EAGLE VISION EV3000-D, User Manual

Page: 95 / 107

EV3000-D manual
Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law
is prohibited. ©2008 United Vision solutions, Co., Specifications are subject to change. Check website:
www.unitedvisionsolutions.com
u–G Command Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7
43 AGC
auto/on/
off
Command FFh Receiver
ID
00h 2Fh 00h 00~02h Checksum
EV3000-D
Response u–•ŒG
Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) Byte 6 = 1 (It will set to continuous auto
adjust),Byte6=2 (It will set to manual adjust)
44 Set
shutter
speed
Command FFh Receiver
ID
00h 37h 00h 00~02h Checksum
EV3000-D
Response
u–•ŒG
Description Receiver ID=00h~FEh,Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) Select sensitivity in Byte 6.[0 – low,1 –
medium,2 - high]
45 Adjust
white
balance(
R-B)
Command FFh Receiver
ID
00~01h 3Bh 00h 00h Checksum
EV3000-D
Response u–•ŒG
Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) NUC using the internal shutter.
46 Adjust
white
balance(
M-G)
Command FFh Receiver
ID
00~01h 3Dh 00h 00h Checksum
EV3000-D
Response u–•ŒG
Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) NUC using an external surface.
47 Adjust
gain
Command FFh Receiver
ID
00~01h 3Fh 00h 00h Checksum
EV3000-D
Response
u–•ŒG
Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) Set absolute gain.
48 Adjust
auto iris
level
Command FFh Receiver
ID
00~01h 41h 00h 00h Checksum
EV3000-D
Response
u–•ŒG
Description Receiver ID=00h~FEh, Camera 2 is Thermal Camera (Clear Bit 6 of
Byte3 to Select Camera 2.) Set absolute level.