TKS510ET SILVER SERIES
OPERATION AND MAINTENANCE
Page 5
2.3 - PREPARING THE ENGINE FOR OPERATION
Check the level of the oil in the engine. Fill the fuel tank
with
UNLEADED PETROL
. Make sure switch
pos. 9
Fig. 5
located on the engine, is turned to
OFF,
otherwise
1) Side brush control lever:
switch the lever to
ON
and the side brush
will move to work position and start spinning. To stop the brush,
switch the lever to
OFF.
2) Key switch:
this switch starts and stops all the machine’s functions.
3) Battery charger socket
(on the electric version only): by plugging
a
12 V 10A
battery charger in this socket you will recharge the
battery (see the section on battery recharging).
4) Charge indicator light
(on the electric version only): this light
indicates the state of the battery during operation.
5) Accelerator lever
(on the engine version only): operate this lever
to regulate the speed of the machine.
6) Traction lever:
by pressing this lever, the machine will start
moving forwards.
7) Filter shaker lever:
this lever operates the filter shaker to clean the
filter (see the section on filter maintenance).
8) Knob to operate the air suction inlet
(located under the cover):
this opens or closes the suction valve.
9) Timer
(on the electric version only): it points out the total amount
of the work hours of the machine (Optional).
10) Filtershacker button
(Optional).
11) Suction switch.
12) Battery charger on board version
(Optional)
13) Flap raise lever
14) Front hopper unblocking lever
you will not be able to operate the key
pos. 2 Fig. 3
on the
dashboard. For more detailed information on the engine
consult the relevant manual.
3.1 - CONTROLS
