eagle Foodservice equipment, eagle Mhc, specFAB
®
, and retail Display are divisions of eagle Group. ©2018 by the eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
ASSEMBLY INSTRUCTIONS
QuadPLUS
®
Polymer Dunnage Rack
(End)
IMPORTANT!
Figure 2b
3-sided
frame
post
wire shelf
Figure 2c
Figure 3a
QuadPLUS
®
shelf mats
2. Attach wire shelf to post/frame assembly.
A. Stand the post/frame assembly upright, and snap the
split sleeves onto each post at the topmost groove (see
Figure 2a).
B. Mount the wire shelf, inserting the posts through the
corner collars of shelf (see Figure 2b) until the split
sleeves are seated snugly within the collars.
C. Securely seat wire shelf using a board and hammer at
each corner (see Figure 2c).
3. Attach QuadPLUS
®
shelf mats.
A. Position polymer mats onto wire shelf accordingly (see
Figure 3a).
B. Gently push each mat down along the front and rear to
snap them into place.
Assembly is complete.
notch in
end mat
notch in end mat
Note:
Notches
indicate
end mats.
Figure 2a
post
split sleeves
