Eagle Equipment MTP-11V3, Installation & Operation Manual, Page: 17 / 43

EAGLE MTP-11V3 Product Manual
17
6] All anchors must have a minimum of 3 ¼” embedment in the concrete. If the top of the anchor
exceeds 2 ¼” above the floor grade, you
DO NOT have enough depth on the anchors.
STEP 7
Installing the Overhead Beam
1] Connect the two overhead beam sections together and install (5) ½” bolts, flat washers, lock
washers, and nuts.
Note: The bolts should be inserted from the inside facing out.
2] Attach the ends of the Overhead Beam to the post top caps using (4) ½” bolts, flat washers,
lock washers, and nuts. (Fig. 10)
(Fig. 10)
STEP 8
Securing the Off Side Post
1] Re-check the position and placement of the Off Side Post. Make sure the post is plumb and
square in relation to the Main Side Post.
2] Drill through the holes in the base plate and install anchor bolts and secure the Off Side Post
as described in
Step 5, numbers 1-6 above.
3] Both posts are now secured.