Page 2
www.eaelec.com
Important
-
The decals must be cut apart (as shown
on the right) just inside the dotted lines before
immersing them in water.
Preparing the Decals
Final Assembly For Propane Truck
Cut Out Decals
Push here
Propane truck
assembly complete
Step 2 - Attach the propane bed to
the chassis
The chassis is painted flat black except for the front
bumper/grill, wheel hubs, fuel tanks (which are all
painted with Tamiya X11) and the seats which are tan (
Tamiya XF-78).
Chassis
Propane Bed
Cab
For this cab I used a paint+priner spray can to spray the
body gloss red. I used a toothpick to apply paint to the
headlights and signal lights (Tamiya X11).
Gloss Red
Gloss Red
Gloss Red
Gloss White
Decal
Chrome Silver
Chrome Silver
Painting Guide For Propane Truck
I sprayed the bed flat white, then sprayed it with gloss
coat before applying the decals. I apply paint to the
signal lights using a toothpick. After the decals have
dried, I sprayed with glosscoat again to preserve the
decals.
Step 1 - Insert the bottom front
of the cab behind the bumper as
shown above, then push gently
on the rear part of the cab roof
until the cab snaps into place.
Flat Black
Flat Tan
Chrome Silver
Do Not Paint
Chrome Silver
