Product Manual Mona Switch V2
EAE KNX Mona Series
MONA Switch R3.0
©
EAE Technology www.eaetechnology.com Page 18 / 34
4.5.2. Proximity
This function is used to dim the LEDs when device not using for a certain time.
4.5.2.1. Parameters
4.5.2.2. Communication Objects
No
Object Name
Function
Data Point Type
Flags
80
Proximity
0=Absence; 1=Presence
1 bit DPT 1.011
CT
CW
CWT
BIT6: 0=Presence; 1=Absence
1 Byte DPT 26.001
CT
CW
CWT
This object is used between devices to activate/deactivate Proximity dim simultaneously.
Parameter
Setting
Description
PROXIMITY (Presence/Absence)
Proximity Detection
unchecked
/ checked
This parameter activates auto-dim according
to proximity state.
Proximity Source
Button Press
, Object, Button
Press and Object
This parameter is used select the proximity
type.
Presence Timeout
1…
10
…255 s
This parameter defines the timeout for
Presence. When it is reached, the device will
be in Absent mode and dimming will be
applied.
Send Proximity Status
unchecked
/ checked
This parameter is used to send Proximity
status via group object.
Proximity Object
Single Generator
, Multi
Generator
This parameter is used to select the
sending/receiving type of proximity
Presence Transmit Repeat
Interval
0
…255 s
This parameter is used to determine the
repeat interval for proximity status.
Proximity Generator ID
1
, 2, 3
This parameter will be shown if “Send
Proximity Status” function box is checked. It
is used for Multi Generator ID assignment.
Sends 1-byte object.
Object Monitoring
Timeout
0
…255
This parameter is used to determine the
timeout for proximity object receiving.
Device will be in Absence mode end of the
time if there is no presence.