Product Manual Mona Switch V2
EAE KNX Mona Series
MONA Switch R3.0
©
EAE Technology www.eaetechnology.com Page 14 / 34
4.3. LED Color
4.3.1. Parameters
4.3.2. Communication Objects
No
Object Name
Function
Data Point Type
Flags
74
LED Custom Color
0=R, 1=Y, 2=G, 3=C, 4=B, 5=M, 6=W
1 Byte DPT 5.010
CRW(T)
LED Custom Color [+/-]
.<>R<>Y<>G<>C<>B<>M<>W<>.
1 bit DPT 1.007
CW
Custom Color for Status LEDs can be changed via object.
R: Red, Y: Yellow, G: Green, C: Cyan, B: Blue, M: Magenta, W: White
Parameter
Setting
Description
CUSTOM COLOR
Custom Color
Red
, Yellow, Green,
Cyan, Blue, Magenta,
White
This parameter is used to select the type of color
changes for custom color option.
Custom Color Object
checked/
unchecked
This parameter allows to change Custom Color
via com object.
Object DPT
Enumerated,
Step [+/-]
This parameter will be shown If
Custom Color
Object
is
Enabled.
Custom olor can be changed
with these objects.
Object Feedback
None,
After KNX bus
recovery only,
On change,
Always
This parameter is shown if
Custom Color
>
Object DPT
is selected as
Enumerated
. It is used
to transmit status value of Custom Level
brightness.
Value after KNX bus recovery
Reset,
Keep
This parameter is used to send custom
brightness level after bus voltage return.