Installation, Operation and Parts Manual
EE-MR35
20
S/N
Components
Methods
Period
13
Upside rollers and start
rollers
Push the UP and DOWN button to check if the roller is
over-worn or cannot roll. Add grease to ensure smooth
running. Change over-worn rollers.
Every 3 months
14
Terminals in the control unit
Open the control unit, inspect the wire terminals and
screw firmly if any terminals become loose.
Every 3 months
Whole Lift
Running the lift for several cycles with and without rated
load. The lift can run steadily and smoothly with no
abnormal noise.
Every 3 months
16
Hydraulic oil
Change the oil 6 months after initial use and once per year
thereafter. Inspect the hydraulic oil and change the oil if
the oil becomes black or there is dirt in the oil tank.
Every year
If users stick to the above maintenance requirements, the lift will always keep a good working condition
and its service life could be extended.
