Use
This d
t and its contents are the property of CASSIDIAN
nd must not be copied or circul
7
1
2
3
4
5
3.4.5
Consulting the configuration
The IDR
IDO 3G configuration is consulted using the state bar at the bottom of the screen,
which displays the following information:
•
Transmission
: "off" or "on",
•
TX Pwr
: transmission power on the selected channel,
•
Rx Pwr
: reception power (ambient noise) on the selected channel,
•
Channel
: selected channel (private channel and absolute channel (# character)),
•
Alarms
: "n" with n being the number of active alarms.
The state bar is refreshed every 30 seconds.
3.4.6
Alarm supervision
Two types of alarm may occur on the IDR
IDO 3G:
• software alarms (see Section 3.4.6.1),
• hardware alarms (see Section 3.4.6.2).
3.4.6.1
Software alarms
If a software alarm is received, contact the manufacturer's technical assistance
department.
3.4.6.2
Hardware alarms
The hardware alarms may come either on the synchronisation board or on the
3G PA-TRX module (see Table 3.1).
