4.0 Flight controller
Product characteristics:
The STM32 F405 master chip can run higher PID cycle time and
gyroscope.Integrating accelerometers and gyroscopes using an
ICM20602 chip with SPI bus (the highest operating frequency of
the gyroscope can be set to32KHz);Flight control board OSD chip,
supporting DMA mode (using F4 MCU to control OSD), can use
Beta Flight tuning softwarePart adjustment parameters;
Supporting BetaFlight firmware, you can use BetaFlight tuning
software to easily adjust various parameters, more suitable for
FPV flyingRow and competition;Support various types of
receivers (such as: SBUS, SUMH, SUMD, SPEKTRUM1024/2048,
XBUS, PPM, etc.)Type of receiver;With LED programmable signal
output port, support programmable LED lamp strip, can adjust lamp
strip color and flash mode through flight control;Has a voltage
monitoring port (BAT) and a current monitoring port (CRT) to
monitor battery voltage and current (requiring additional electricity)
Flow meter);It has a buzzer output port and supports an external
alarm buzzer for voice warning or flight status notification.It has
Micro USB interface to facilitate users to connect computers.
Interface definition chart:
-6-
TYRO109
QUICK START GUIDE