WHAT DO I DO MY POOL IS CLOUDY?
Run your filter a little longer than normal for your pool and add a little extra chlorine if
necessary.
It is advised to clean your Solar Ionizer outside, while the copper anode is wet. Carefully
unscrew the thumbscrew and proceed to remove the basket. Then brush the coils and
anode with the wire brush provided. (It is not necessary to be perfectly clean) Afterward,
replace the basket and screw in the thumbscrew.
PLEASE NOTE: Algaecides, conditioners, clarifies, etc., are unnecessary. Higher
chlorine levels may be required with an increase in water temperature, increased
swimmer load, rainfall, or new water added. If using liquid chlorine, add at or after
sundown because the sun's rays quickly neutralize chlorine. The recommended
levels are not absolute and may vary with changing water conditions. What works
best for your pool is determined by experience. Allow your water to seek its own
balance. Do not arbitrarily alter the pH, apply large doses of chlorine
(AKA 'Shock'), add algaecide, add conditioner,or try to change
perfectly clear water.
BEST WAY TO CLEAN
07
08
The pH range may now be expanded from 7.2 - 7.8 ppm. The EaazPool Solar Ionizer
works well at higher pH values, so do not arbitrarily attempt to adjust the pH if it is within
this recommended range. Keep in mind that the general idea is to use your Solar Pool
Ionizer just enough to maintain an adequate ion level, and to determine how little chlorine is
necessary to keep the water clear. Allow the water to settle down and seek its own
balanced condition.
I DON’T THINK IT’S WORKING
The occurrence of algae in any shady spot (for example black algae on the pool’s plaster
surface), usually near steps or the deep end of the pool, is caused by how the water is
filtered and will need to be spot treated with a powdered chlorine. Allow the spots time to
dissipate while continuing the use of the Solar Ionizer.
WHAT DO I DO IF I HAVE ALGAE, BUT THE WATER IS CRYSTAL CLEAR?
WARRANTY
The warranty contains the following exclusions. The sacrificial electrode (copper anode)
is a normal replacement item subject to wear and are excluded from the warranty.
Product discoloration, or any other cosmetic or superficial damage or deterioration,
regardless of its cause, is not covered by this warranty. The warranty does not apply to
problems arising from circumstances outside the control of Products, including, but not
limited to the following:
EaazPool warrants this product to be free from defects in workmanship and materials,
under normal residential use and conditions, for a period of one (1) year from the original
invoice date. Shipping and handling fees are to be paid by the customer. EaazPool
agrees, at its option during the warranty period, to repair any defect in material or
workmanship or to furnish a repaired or refurbished product of equal value in exchange
without charge (except for a fee for shipping, handling, packing, return postage, and
insurance which will be incurred by the customer).
A.
Damage or premature wear due to improper pool chemistry, and failure to maintain
pool water chemistry in accordance with the recommendations contained in the owner's
manual.
F.
Problems resulting from tampering, accident, fire, flood, freezing, lightning, insects, or
other natural elements, or other circumstances beyond the control of Products.
D.
Damage due to improper service, as well as unauthorized equipment modifications
and use of non-genuine replacement parts.
B.
Damage due to improper installation or usage, including materials and workmanship
supplied by others.
C.
Damage due to negligence or failure to properly maintain equipment, including the
maintenance of clean the electrode and disassembly.
E.
Damage due to misapplication, misuse, abuse, or failure to operate the equipment as
specified in the owner's manual.
G.
Damage due to over-tightening or excessive pressure or stress.
This warranty is valid only in the United States of America. This warranty gives you specific
legal rights and you may also have other rights, which vary from state to state. This warranty
supersedes all previous publications. Any dispute between the original purchaser and Products
will be settled by binding arbitration, conducted in Mecklenburg County, NC, under the rules of
the American Arbitration Association.
NEED HELP?
SIMPLY TEXT “SUPPORT” TO +1 (980) 447-2700
