Hardware Reference and Operational Manual: RemoteBox
Page 9
This is the pin out of the ANT1/ANT2 ports:
•
Pin-1: Common Ground
•
Pin-2: Antenna 1
•
Pin-3
Antenna 3
•
Pin-4
Antenna 5
•
Pin-5
Antenna 7
•
Pin-6: Antenna 2
•
Pin-7: Antenna 4
•
Pin-8: Antenna 6
•
Pin-9: Antenna 8
DB9 female
RB 2x12 version:
This model uses the Aux Port as an expansion for the Ant 9-12 outputs of ANT1 and
ANT2
•
Pin-1: ANT2-9
Pin-6:
Pin-11: ANT1-10
•
Pin-2: ANT2-10
Pin-7: Ground
Pin-12: ANT1-11
•
Pin-3: ANT2-11
Pin-8: Ground
Pin-13: ANT1-12
•
Pin-4: ANT2-12
Pin-9: Ground
Pin-14:
•
Pin-5:
Pin-10: ANT1-9
Pin-15:
Ameritron RCS-10 Version:
The special firmware compatible with Ameritron RCS-10 uses a BCD output. This
output is available at:
•
Pin-1: Ground
•
Pin-2: “A” Output
•
Pin-6: “B” Output
•
Pin-3: “C” Output
It’s simple to know that this special firmware is used by the firmware during the
startup sequence of the unit. It’s displayed at the LCD a message as:
EA4TX RB1x8 BCD
