Hardware Reference and Operational Manual: RemoteBox
Page 17
RemoteBox 4-Square version
This special RemoteBox version will display 4 directions at the LCD
•
Radio Status: If the PTT is connected to the radio and it’s enabled (SET1)
the RB will monitor the Radio PTT. At this area a “TX” could be displayed
when the Radio is in TX. When this option is enabled, the RB will monitor the
radio PTT and will not change the antenna direction meanwhile the radio is in
TX mode.
•
Antenna Status: An asterisk * is placed beside the name of the direction
selected and only when that direction command was activated. If PTT is
enabled and the Radio is TX, a command order will be delayed till the radio is
again in stand-by. During this time, instead a *, it will be displayed a !.
•
Antenna Direction: The direction is displayed by a flashing.
•
Selection: This is the “TK5EP truth table” (page 9) of the output (DB9-ANT1)
