EA Technology UltraTEV Monitor, Operating Manual

Page: 63 / 112

EA Technology UltraTEV Monitor
TM
Operating Manual 2178L014
60
14 Analysing Data
A system is provided to enable the user to view the data and create custom graphs to show the data
specific to their needs. To access the analysis page for an installation, click on the Analyse button
or through the installation navigation options when using UltraTEV Cloud. The data analysis screen,
shown in Figure 50, is broken down into a few sections. At the very top is the area where any graphs
will be shown. Beneat
h this is a “control box” where the timeframe for the data can be set. Finally,
at the base of the screen are sections showing a summary of the data for each measurement type;
TEV, Ultrasonic, Cable PD and Environmental. See “ Measurement Types ” for an explanation of each
of the measurements types.
Figure 50: Summary tables
The control box can be used to select the timeframe for which the data will be displayed. Either
select from the list the sample period or enter a custom date range as shown in Figure 51. The
sample periods are whole periods where the UltraTEV Monitor was running. Each time the UltraTEV
monitor is stopped and restarted, a new sample period is created. The last item in the list will allow
the selection of all data. Clicking on the Update button will update the summary tables and any
displayed graphs with the new timeframe. The Graph button is used to display any selected data
(see below) in a graph.