EA Technology
CableData Collector Operating Manual
1365/L/01/1
Page 40 of 54
Figure 57 - Dialogue box after successfully saving capture report
10.4.18
File Output Location
The captured data files will be saved in a file with an automatically generated name. All of
the data will be saved into the
Root Folder
, as set on the
Settings
window. Within this
directory, a new directory will be created with the
Job Number
. In this directory, there will be
a directory for each day that collection was performed. In this directory will be the individual
data files. The
Substation ID
and
Circuit ID
fields are used to generate the file name for the
data set. The file name also includes a run number, so if for any reason the test is to be run
again, the run number will be increased and the data will be saved into a new file.
The Filename is displayed at the bottom of the window, as shown in Figure 58, and is
automatically updated when any of the fields are modified.
Figure 58 - Output file name
