e2v ELIIXA+ 16K/8K CXP MONO, User Manual

Page: 18 / 59

U
SER
M
ANUAL
16
K
/8
K
CXP M
ONO
– R
EV
K – 06/2017
P
A G E
| 18
7 Camera Commands
7.1 Device Control
These are Identification values of the Camera. They can be accessed in the “Device Control” section
Feature CXP @
Size
in
bytes
R/W Description
DeviceVendorName
0x02000
Boostrap
32 RO Get camera vendor name as a string (including ‘\0’)
DeviceModelName
0x02020
Boostrap
32
RO
Get camera model name as a string (including ‘\0’)
DeviceManufacturerInfo 0x02040
Boostrap
48
RO
Get camera ID as a string (including ‘\0’)
DeviceVersion
0x02070
Boostrap
32
RO Get camera version as a string (hardware version)
(including ‘\0’)
DeviceFirmwareVersion
0x02090
Boostrap
32
RO Get camera synthetic firmware version (PKG version)
as a string (including ‘\0’)
DeviceSFNCVersionMajor Xml
RO
DeviceSFNCVersionMinor Xml
RO
DeviceSFNCVersionSubMinor Xml
RO
DeviceID
0x020B0
Boostrap
16
RO
Read Serial Nb
DeviceUserID
0x020C0
Boostrap
16
RW
Get device user identifier as a string (including '\0')
ElectronicBoardID
0x08000 32
RO
Read Electronic Board ID
ElectronicBoardTestStatus 0x08020 16
RO
Read Electronic board status
DeviceFirmwareVersion
0x02090
Boostrap
32
RO Get camera synthetic firmware version (PKG version)
as a string (including ‘\0’)
DeviceTemperature 0x08E04 4 RO
Read Main board internal temperature (format signed
Q10.2 = signed 8 bits, plus 2 bits below comma. Value
from -512 to +511) in °C
DeviceTemperatureSelector Xml RO Device Temperature selector
Standby 0x08E08 4 RW
0 :Disable standby mode (“False”)
1 :Enable standby mode (“True”), no more video available
but save power and temperature
STATUS REGISTER 0x08E0C 4 RO
StatusWaitForTrigger
Bit 0: true if camera waits for a trigger during more than
1s
Status trigger too fast Bit 1: true if camera trigger is too fast
StatusSensorConnexion Bit 2: true if sensor pattern checking has failed
Status3V7 Bit 3: true if 3V7 failure
Status3V3 Bit 4: true if 3V3 failure
Status1V0 Bit 5: true if 1V0 failure
Status1V8 Bit 6: true if 1V8 failure
Status1V8ANA Bit 7: true if 1V8ANA failure
StatusWarningOverflow Bit 8: true if a an overflow occurs during FFC calibration