U
SER
M
ANUAL
16
K
/8
K
CXP
M
ONO
–
R
EV
K
–
06/2017
P
A G E
|
17
6
CAMERA SOFTWARE INTERFACE
The CoaxPress Camera is compliant with
GenICam 2.1 and the SFNC 1.5
standards.
This means that the Camera embeds its own definition and parameter description in an xml file.
Most of these Parameters are compliant with the SNFC. The specific parameters (non SNFC) are still
compliant with GenICam and can be detailed through the GenICam API process to the application.
The Frame Grabber software is supposed to propose a feature Brother, based on GenICam, which lists and
allows the modification of the parameters of the Camera.
This feature brother based on GenICam API uploads the xml file of the parameters description embedded in
the Camera.
Then the following description of the parameters and commands is based on the GenICam name of these
parameters. Behind each parameter is a register address in the Camera memory.
The mapping of these registers is not given in this manual because it can change from one version or the
firmware to the next one.
