e2v DIVIINA LM2, User Manual

Page: 22 / 31

DIVIINA
®
LM2
22
0994G -Diviina LM2 04/11
e2v semiconductors SAS 2011
Ö
Read function : “ r fga1 ”;
Return by the camera: Value from 0 to 880 corresponding to a Gain range of 0 to 31dB by step of
0,0351dB
Ö
Write function : “ w fga1 ” <int> ;
•
Analog even Gain
:
Set the Amplification Gain on the even Tap .
Ö
Read function : “ r fga2 ”;
Return by the camera: Value from 0 to 880 corresponding to a Gain range of 0 to 31dB by step of
0,0351dB
Ö
Write function : “ w fga2 ” <int> ;
• Analog Offset
:
Set the global Offset . This command is available in the CommCam “Gain & Offset”
section :
Ö
Read function : “ r offs ”;
Returned by the camera : Value from 0 to 255 which is equivalent to 16 LSB by steps of 0,063
LSB (8 bits)
Ö
Write function : “ w offs ” <int> ;
6.3.5 Save & Restore Settings
The settings of the Camera can be saved in one User bank.
The Factory default settings can be load from its dedicated memory bank.
•
Save & restore settings
:
Allows to save or restore all the Camera settings : This command is
available in the CommCam “Save & Restore Settings” section :
Ö
Write function
ƒ
“ w lcfg 0 ” : Load settings from the Factory default settings
ƒ
“ w lcfg 1 ” : Load settings from the User Bank
ƒ
“ w scfg 1 ” : Save the current settings in the User bank