background image

11 

Appendix: 

 
Federal Communication Commission Interference Statement 

This equipment has been tested and found to comply with the limits for 
a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits  are  designed  to  provide  reasonable  protection  against  harmful 
interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in 
accordance  with  the  instructions,  may  cause  harmful  interference  to 
radio communications. However, there is no guarantee that interference 
will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause 
harmful interference to radio or television reception, which can be deter-
mined  by  turning  the  equipment  off  and  on,  the  user  is  encouraged  to 
try to correct the interference by one of the following measures: 
 

• 

Reorient or relocate the receiving antenna. 

• 

Increase the separation between the equipment and receiver. 

• 

Connect  the  equipment  into  an  outlet  on  a  circuit  different  from 
that to which the receiver is connected. 

• 

Consult  the  dealer  or  an  experienced  radio/TV  technician  for 
help. 

• 

FCC  Caution:  Any  changes  or  modifications  not  expressly  ap-
proved  by  the  party  responsible  for  compliance  could  void  the 
user's authority to operate this equipment. 

 
This device complies with Part 15 of the FCC Rules. Operation is sub-
ject  to  the  following  two  conditions:  (1)  This  device  may  not  cause 
harmful  interference,  and  (2)  this  device  must  accept  any  interference 
received, including interference that may cause undesired operation. 
 

IMPORTANT NOTE: 
FCC Radiation Exposure Statement: 

This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth 
for  an  uncontrolled  environment.  This  equipment  should  be  installed 
and operated with minimum distance 20cm between the radiator & your 
body. The antenna(s) used for this transmitter must not be co-located or 
operating in conjunction with any other antenna or transmitter. 

Summary of Contents for EZ-Bridge













Reviews: