6
(1)
Power: Press to turn the unit ON/OFF
(2)
Flame: Press to adjust the level of brightness of the flame: L6- L5- L4- L3- L2- L1-
OFF. (L6 being the brightest and L1 the dimmest)
(3)
Timer: Press to adjust the duration of the heater: 30 min- 1H- 2H- 3H- 4H- 5H- 6H- 7H-
8H- 9H- OFF
(4)
Down Light: Turn the down light ON and OFF.
(5)
Flame speed: Press to adjust the level of speed of the flame: L1 – L2 - L3 – L4 – L5 (L5
being the fastest and L1 the slowest)
(6)
Heater: Press to turn the heater ON/OFF. Adjust the temperature rating as follows: 62°F
-- 82 °F (17 °C --- 27 °C)
Note: Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-Zinc) or rechargeable (nickel-cadium) batteries.
REPLACING REMOTE CONTROL BATTERY
When remote control stops operating or its range seems reduced, it is time to replace the
battery with a new one.
The battery compartment is located on the
back end of the remote.
Press and slide the battery door open and remove the old battery.
Insert a CR2025 battery, checking that the “+” and “-” terminals
of the battery matches the inside of the battery compartment.
Replace the battery compartment door.
DISPOSAL OF USED BATTERIES
Battery may contain hazardous substances which could endanger the environment and
human health. This symbol marked on the battery and/ or packaging indicates that used
battery shall not be treated as municipal waste.
Batteries should be disposed of at an appropriate collection point for recycling.
By ensuring the used batteries are disposed of correctly, you will help preventing potential
negative consequences for the environment and human health.
NOTE: PLEASE OPERATE REMOTE
TRANSMITTER AT A SLOW
MEASURED PACE. PRESS REMOTE
CONTROL BUTTONS WITH AN EVEN
MOTION AND GENTLE PRESSURE.
REPEATEDLY PRESSING BUTTONS IN
RAPID SUCESSION MAY CAUSE THE
TRANSMITTER TO MALFUNCTION
