5
(1) On/Off /Main Power Button
a. Press to switch the unit ON/OFF.
b. The unit will turn on to its default factory settings.
C. Child Lock. Unit is working, press power button 5 seconds enter Child Lock mode. Log
set light will flicker 5 times and can’t choose any other function. Press Power button 5
seconds again, then Child Lock mode will off.
(2) On/Off Heater Button
This allows programming of the thermostat. The fireplace can be used without the heater if
desired.
Adjust the temperature rating from 62°F - 82°F - ON (17°C - 27°C).
Note: °F is the default unit. To change from Fahrenheit to Celsius: Hold the heater button for
approximately 5 seconds, the temperature readout will switch directly from °F to °C and vice
versa.
(3) Adjustable Flame Brightness
a. Adjust the flame brightness level: L6 - L5 - L4 - L3
- L2 - L1 - OFF (L6 being the brightest and
L1 the dimmest)
(4) Adjustable flame speed
a. Adjust flame speed level: L1 – L2 - L3 – L4 – L5 (L5 being the fastest and L1 the slowest)
(5) Adjustable Timer
a. This allows you to control the duration of the heater function. Press the timer button until
you have reached the desired duration time. Levels: 30 min - 1H - 2H - 3H - 4H - 5H - 6H -
7H - 8H - 9H – OFF
Remote Control Operating Procedures
(1) Power-------- ----------(4) Down Light
--------- (5) Flame Speed
----------(6) Heater
(2) Flame- ------
(3) Timer--------
