23/43
GM DCBS EL-52800
User Manual / Ref. MAN_DCBS_GM_EN_V1.0
Table of Contents
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Safety Reminders
Appearance and Dimensions
Trolley LED’s
Remote Presentation
Remote Job Storage
Accessories
Installation
Battery Cable Clamps Connection
Power Cable Connection and Power On
BAC Input
Wi-Fi Connection (Remote to Trolley Only)
The Main Menu
Vehicle Selection from Database
Manual Selection of Battery
Remote Diagnostic
Trolley Diagnostic
Charge
Load Test
Reserve Capacity Test
History
Settings
Limited Warranty
How to Obtain Warranty
Workflow
10/28
PDI TEST ////////
If the results come back as BAD,
the tool will show “Battery is bad”.
If the test is interrupted, or the
clamps are not detecting the
battery correctly, the result will
come back as “Clamp connection
failure” and the test must be
performed again.
If the battery voltage is too low,
(below 12.4V) the tool will perform
a pre-charge on the battery, then
conti dnue w ith the diagnostic
If the tool determines that the
battery is bad, the tool will ask the
user to input the VIN, RO, and BAC
to generate a warranty code.
BAC should be pre-filled. VIN may
be pre-filled, if vehicle was selected
using VIN Scan Feature.
After Diagnostic Test has been
performed, go to the print icon
to print the receipt of the result.