20
General Guidelines:
•
Avoid knock or bumping the tiller console and scooter components.
•
Avoid exposure of your scooter to extreme conditions such as hot or cold
temperatures and moisture.
•
Keep the tiller console clean and dy.
•
Check all connectors to ensure that they are tight and secured properly.
•
Check
all electrical connectors including the charger’s connectors. Make
sure they are all tight and are not corroded. Batteries must sit flat in the
battery tray with the battery terminals facing each other; not backwards.
•
When you are finished daily usage, please pull out the key to reduce
unnecessary consumption of the power.
•
This product has a power saving feature. When the scooter is powered on
and has not been used for 20 minutes, the power will shut off
automatically. To turn the scooter back on when this happens, remove
and reinsert the key.
•
The body shroud has been sprayed with a clear sealant coating, and you
can apply a light coat of car wax to help it retain it high-gloss appearance.
•
All wheel bearings are pre-lubricated and sealed. They request no
subsequent lubrication.
•
Always use discretion when operating your scooter. Do not subject the
scooter do conditions you are unsure if it can perform in. If the conditions
are questionable, do not attempt or damage to the scooter and personal
injury may occur.
•
This scooter is designed to hold only one rider. Do not attempt in any
situation to put a second rider, even a child, on the scooter with you.